Anthem MDX-16 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940/ 40

Afdrukken

Je bekijkt pagina 24 van 40

24

3.6 SUBWOOFER OUTPUTS

If you’re using this MDX to power a passive (non-powered)

subwoofer refer to the next section. To connect a powered

subwoofer, use an RCA cable, connect a zone’s Sub Out to a

powered subwoofer LFE input, and enable the subwoofer using

Zones > Subwoofer. If the powered subwoofer doesn’t have

an LFE input, connect to either the left or right input and set

the sub’s low-pass lter (commonly referred to as crossover) to

its highest or bypass setting. Please refer to your subwoofer’s

manual for specic connection and control setting instructions.

This control also enables the high pass lter on the left and

right outputs. If you are not using ARC and do not have a sub-

woofer connected, you can enable this control and set the

crossover frequency. This will avoid overloading speakers that

don’t support a full-range signal.

ANALOG OUT

RL

LR

SUB

12345678910111213141516171819202122232425262728293031323334353637383940/ 40

Bekijk gratis de handleiding van Anthem MDX-16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Anthem (Niet gecategoriseerd)

Handleiding bekijken

Anthem MDX-8

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd