Anthem MDX-16 handleiding
Handleiding
Je bekijkt pagina 11 van 40
11
For optimum performance and enjoyment, your MDX should
be appropriately set up. If you’re using a subwoofer or sub-
woofers, ARC (Anthem Room Correction) sets crossovers and
levels for a perfect blend with the main speakers. The rest of
the settings mostly relate to your preferences. Please fully
congure all zones with the proper output modes (single-end-
ed, stereo or mono bridge), speaker prole and subwoofer
settings (present or not, active or passive) before running ARC.
2.1 ACCESSING THE USER INTERFACE
For initial setup, the MDX should be connected to a network
and plugged into the wall with the On Mode switch set to Auto.
Turn on the MDX by setting the master power switch to On.
The Power light on the front panel indicates that the MDX has
powered up. Once the LAN light on the front panel turns blue
or red, the MDX has connected to your network and acquired
a network address.
2.2 FINDING THE MDX’S IP ADDRESS
The MDX is congured using an interface accessed using a
web browser. Identify the MDX’s IP address to proceed.
You can discover the MDX’s IP address using the ARC Gene-
sis software. Start the ARC program on a PC or Mac, choose
Launch ARC, and hover your mouse cursor over the MDX, wait
for a second, and it shows the IP address in the device discov-
ery screen.
We also recommend using Fing, a free network device detec-
tion app available on iOS, Android, and Windows. This app
identies devices on a network and shows their IP addresses.
These identify with MDX-8 or MDX-16 or Paradigm Electronics.
To access the MDX’s conguration interface, open a web
browser (we recommend Chrome or Safari), type the IP ad-
dress into the browser’s address bar, and hit enter.
2.3 IDENTIFYING MULTIPLE MDXs
When installing more than one MDX, there are multiple IP ad-
dresses. To identify each MDX, use a web browser to connect
to the rst one and set General > Preferences > Unit ID to On.
The ID light on the MDX’s back panel and the Power indicator
on the front ash. The MAC Address displayed under General
> Information also matches the unique MAC Address printed
on the back of the MDX. Note that the last few characters of
the factory default unit’s name correspond to the end of the
MAC address printed at the back of the MDX.
2. THE USER INTERFACE
Bekijk gratis de handleiding van Anthem MDX-16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Anthem |
| Model | MDX-16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3535 MB |
