Antelope ZEN QUADRO handleiding
Handleiding
Je bekijkt pagina 32 van 86
Antelope Audio Zen Quadro Synergy Core User Manual
Page 32
Quick Start
Let’s begin with some quick examples of essential tasks being accomplished in the Control
Panel.
Note: These examples do not convey the "correct" or "only" way of accomplishing the
following tasks. They merely illustrate some fundamental logic and offer solutions to the initial
stumbling blocks most often encountered by novice users.
Monitor incoming microphone audio via headphones.
Say you want to monitor incoming microphone audio from input A1 via Headphone output 1
(HP1). Connect your equipment and open the Control Panel. Do the following:
1. In the 'PREAMPS' section, head to the leftmost preamp and click on the signal type selector
drop-down menu. Choose 'Mic' and don't forget to activate 48V phantom power if your
microphone requires it.
2. Click the input selector above the 'AFX' area and choose PREAMPS > PREAMP 1 from the
menu.
3. Adjust input gain and headphone output level until you hear the microphone audio in your
headphones.
Apply Synergy Core FX to incoming audio
Click the 'AFX' area below the input selector to open the Synergy Core FX rack window. Click
the 'ADD NEW EFFECT' button and make your choices. Close the window when you are done.
Bekijk gratis de handleiding van Antelope ZEN QUADRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Antelope |
| Model | ZEN QUADRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12817 MB |
