Antelope ZEN QUADRO handleiding
Handleiding
Je bekijkt pagina 16 van 86
Antelope Audio Zen Quadro Synergy Core User Manual
Page 16
1. USB off – no device is detected on the USB 2 port.
2. USB on – device is connected to the USB 2 port.
3. Sample rate – audio is playing from the device, and this is the sample rate it is
using.
You need to manually match the main Zen Quadro SC sample rate with the
secondary USB 2 port sample rate, shown in red!
Note: The display is not touch-sensitive.
2. Function Keys - Gain, HP/MON, Antelope button.
'Gain' button - the 'Gain' button features the following functionality:
• Press (and keep pressing) 'Gain' to cycle through input gain adjustments for the
interface's analog inputs. For inputs A1, A2, A3 and A4, press the rotary knob to
switch between Mic and Line mode, press and hold the rotary control to activate or
deactivate 48V phantom power. For inputs A1 and A2, press the rotary control to
switch between Mic, Line and Hi-Z mode. Turn the rotary control to adjust input
gain. Press the 'Antelope button' to exit.
• Press and hold 'Gain' to enter the Control Menu.
Control Menu
Turn the rotary control to navigate the menu and select an entry. Press the rotary control
to enter the sub-menu you have chosen. Turn the rotary control to browse the available
options and make adjustments. Press the rotary control to confirm.
The Control Menu has the following entries:
• Clock Source - choose the clock source (Internal, S/PDIF, ADAT).
• Sample Rate - choose the device sample rate (32kHz - 192kHz). Make sure your
choice always matches the DAW and operating system sample rates.
Bekijk gratis de handleiding van Antelope ZEN QUADRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Antelope |
| Model | ZEN QUADRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12817 MB |
