Antelope Corefit II handleiding
Handleiding
Je bekijkt pagina 19 van 114
18 19
ENGLISH
The intensity
The intensity determines the pulse strength, i.e.
how much electric charge ows in a certain pe-
riod of time. The higher the intensity, the more
muscle bres will be trained.
*The frequency
The frequency determines how often an electrical
pulse occurs within a certain period of time. In
turn, this determines how often individual muscle
bres contract. You cannot change this value in
the Antelope programs.
*The pulse length (pulse duration)
The pulse length or pulse duration denotes the
time during which electrical pulses ow into the
muscles. The longer this time is, the more inten-
sively and deeply the muscles will be trained.
*Duty cycle
The stimulation interval, also known as the duty
cycle, determines the ratio between the stimula-
tion phases and pauses during a training session.
Some EMS programs require these pauses for
your muscles.
Programs with a duty cycle
Some programs require a stimulation interval.
This could be as follows:
Example: You select a program with the duty cy-
cle “4 sec ON, 4 sec OFF”. As such, it will run at a
repeating interval of four seconds of stimulation
and four seconds of pause.
BEISPIEL
ON TIME = 4 Sekunden Stimulationsphase
OFF TIME = 4 Sekunden Stimulationspause
Ein Stimulationsintervall
(Duty Cycle)
4S ON 4S ON 4S ON
4S OFF 4S OFF 4S OFF
IMPULS
ZEIT
PULSE
One stimulation interval
(duty cycle)
EXAMPLE
ON TIME = 4 seconds stimulation phase
OFF TIME = 4 seconds stimulation pause
TIME
Programs without a duty cycle
Some programs do not have a duty cycle. In such
cases, your muscles will be continuously stimulat-
ed.
ON TIME = konstant und durchgängig
ON
IMPULS
ZEIT
PULSE
ON
TIME
ON TIME = constant and continuous
9. CLEANING AND
MAINTENANCE
•Always remove the batteries from the device
before cleaning.
•Clean the device with a slightly damp cloth. If
it is very dirty, you can also moisten the cloth
with a mild soapy solution.
•Do not drop the device.
•Ensure that no water enters the device. If this
happens, only use the device again once it
has fully dried out.
•Do not use any chemical or abrasive cleaning
agents for cleaning.
•The belt is not machine-washable. Once you
have removed the device (control unit) from
the belt, you can wipe down the belt with
lukewarm water. Use a mild soapy solution or
liquid detergent for this. Do not use bleach.
10. ACCESSORIES AND
REPLACEMENT PARTS
To purchase accessories and replacement parts,
please visit www.beurer.com or contact the cor-
responding service address (according to the
service address list) in your country. Accessories
and replacement parts are also available from re-
tailers.
Designation Item number
and/or order
number
Accessory set,
comprising:
• 2x adhesive electrodes
(45 x 45 mm)
• 1x connection cable
• 1x quick guide
Article 647.05
Bekijk gratis de handleiding van Antelope Corefit II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Antelope |
| Model | Corefit II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14285 MB |
