Anova OR9500 handleiding
Handleiding
Je bekijkt pagina 27 van 30
EN
27
- Natural wear and tear.
- Misuse, neglect, careless operation or lack of maintenance.
- Defects caused by incorrect use, damage caused due to manipulations carried out by
personnel not authorized by Anova or use of non-original spare parts.
- Defects of normal wear parts, such as bearings, brushes, cables, plugs or accessories
such as drills, bits, saw blades, etc.
- Damage or defects resulting from abuse, accidents or alterations.
- Improper use and storage (explicit reference to the fact that the rules described in the
operating instructions have not been followed).
- Customer-caused wear (e.g. broken saw blades, worn carbon brushes, etc.).
- Secondary wear and damage due to lack of maintenance, repair, lubricants (e.g.
overheating damage due to blocked cooling slots, bearing damage as a result of dirt,
frost damage, etc.)
- Damage as an obvious result of excessive use/overload.
- Damage caused by improper supplies (e.g. incorrect fuel)
- Load-induced failure of casing components or accessories due to abnormal stress
- Load-induced deformation of casing components or accessories due to abnormal
stress.
- Damage resulting from the operation of supplies that overfill or leak due to improper
storage, inappropriate cleaning agents or other damaging chemical components.
- Damage due to improper exposure to extreme temperatures (e.g., freeze fractures,
thermal deformation of components, etc.)
- Damage from permanent exposure to ultraviolet radiation.
- Damage caused by inadequate maintenance.
- Any damage caused by failure to follow the instruction manual
- Any product that has attempted to be repaired by an unqualified professional.
- Any product connected to an inadequate power source (amps, voltage, frequency).
- Any damage caused by external influences (water, chemicals, physical, shock) or
foreign substances.
- Use of unsuitable accessories or parts.
- It does not include defects in normal wear parts, nor does it cover damage or defects
resulting from abuse, accidents or alterations, nor transportation costs.
Additionally, the warranty is void if the product has been altered or modified, or if the
trademark/serial number on the machine has been defaced or removed.
Routine maintenance, tune-up, adjustments or normal wear and tear are not covered under
this warranty.
This manual does not cover all possible situations regarding warranty exclusions, for more
information contact your nearest Anova dealer.
9.3. In case of incident
The guarantee must be correctly completed with all the requested information, and
accompanied by the purchase invoice.
Anova reserves the right to reject any claim where the purchase cannot be verified or where it
is clear that the product was not maintained properly (maintenance, clean ventilation slots,
lubrication, carbon brushes regularly maintained, cleaning, storage, etc.) .
Private use means personal domestic use by an end consumer. Instead, commercial use
means all other uses, including uses for commercial, income-generating or rental purposes.
Once the product has been used for commercial use, it will be considered a commercial
product for the purposes of this warranty.
Bekijk gratis de handleiding van Anova OR9500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Anova |
| Model | OR9500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4996 MB |