Anker Omni E25 handleiding
Handleiding
Je bekijkt pagina 7 van 25

4. Follow the instructions in the app to set up the Wi-Fi connection.
2.4 Reset the Wi-Fi Connection
If you bump into issues when connecting your RoboVac to the eufy app, try to reset the Wi-Fi connection.
Press and hold the power and recharge buttons simultaneously for 3 seconds until you hear a voice prompt.
You will hear a voice prompt when the Wi-Fi connection has been reset, and the LED indicators on RoboVac will quickly flash white. Now you can follow
the instructions in the app to set up the Wi-Fi connection.
3. Using Your Omni E25
3.1 Important Tips Before Use
A. Remove power cords and small objects (socks/toys/slippers/towels/weighing scales, etc.) from the floor that may entangle RoboVac.
B. Fold tasseled edges of rugs underneath to prevent tangling RoboVac. Avoid cleaning high-pile rugs or rugs thicker than 0.83 in / 21 mm as they may
cause RoboVac to malfunction.
C. Before mapping, it is strongly recommended to place physical barriers in front of fireplaces and certain areas (i.e. air vents) that may cause damage to
the robot if entered. For future use, set up virtual boundaries in the eufy app to prevent the robot from falling down staircases.
D. Avoid vacuuming large amounts of water as it will potentially damage the device.
E. RoboVac may climb on top of objects less than 0.83 in / 21 mm in height. Remove these objects if possible.
F. Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on
carpeted / reflective floors. Place physical barriers or set a “No-Go” zone to block off areas where RoboVac may fall.
3.2 Mapping
This feature is designed to help your RoboVac efficiently learn the layout of your home, ensuring thorough and systematic cleaning. By creating a detailed
floor plan, your RoboVac can navigate and clean with precision.
To maximize the efficiency and accuracy of the mapping process, please follow these steps:
• Open All Doors: Ensure all doors within the cleaning area are open. This allows the robot to access and map each room seamlessly.
• Block Off Restricted Areas: If there are specific zones you don't want the robot to enter, use physical barriers to block these areas. This can enhance
mapping accuracy and prevent the robot from entering unwanted spaces. After the mapping is completed, you can remove physical barriers, and set up
restricted areas to prevent the robot from entering those areas.
• Remove Obstacles: Clear any objects, such as toys, cables, or small furniture, that might obstruct path or become entangled in its brushes. This helps
RoboVac move freely and map the area without interruptions.
• Do Not Move the Base Station: Once the floor plan is created, avoid relocating the base station. RoboVac relies on the base station as a reference
point for navigation and mapping. Moving it may disrupt the accuracy of the floor plan.
Bekijk gratis de handleiding van Anker Omni E25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Anker |
Model | Omni E25 |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 12401 MB |