Angénieux Optimo Ultra Compact 21-56 handleiding

Lens

Angénieux

24 pagina's

PDF beschikbaar

Handleiding

Please refer to the previous page figure for the numbers into brackets.

- Unscrew and remove the tightening pin lever (4)

- Unscrew and remove the four screws (7) holding the red deco ring (6)

- Remove the deco red ring (6)

- Unscrew and remove the four screws (5) holding the rear unit FF

CAUTION: the electronic pins on the rear unit are very delicate, manipulate the rear with caution

- Remove the rear FF unit (3)

- On the main electronic cardboard, put the electronic switch n°1 in the bottom position

- Remove the caps from the U35 unit and put it on the FF unit

- Put in place the rear U35 (3) on the lens with the help of the indexation pin

- Tighten the four screws (5) holding the rear unit FF

- Put in place the deco red ring (6)

- Tighten the four screws (7) holding the red deco ring (6)

- Tighten the tightening pin lever (4)

- Unscrew and remove the three screws (1) on the focal and iris index mark ring

- Rotate 180° the focal and iris index mark ring in order to see the U35 indication

- Tighten the three screws (1) on the focal and iris index mark ring

CAUTION: In case of a bad position of the electronic switch, the metadata reading will be wrong!

Bekijk gratis de handleiding van Angénieux Optimo Ultra Compact 21-56, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.