ANCEL FX3000 handleiding
Handleiding
Je bekijkt pagina 7 van 28
1
FX3000 User's Manual
EN
1. Introduction
The FX3000 is specially developed by ANCEL, which supports all 10 modes
of OBD II test for a complete diagnosis. Featuring the 3.5” TFT color display, it
enables users to read/clear DTCs, record, save and playback data in live graphic
display. The FX3000 is also very easy to use. With built-in help menus and code
definitions, diagnosing and repairing that dreaded Check Engine Light is now
easier than ever!
It can be connected to PC through the USB cable for upgrade to keep updated
with the latest software version.
Notice: FX3000 may automatically reset while being disturbed by strong static
electricity. THIS IS A NORMAL REACTION.
2. General Information
2.1 On-Board Diagnostics (OBD) II
The first generation of On-Board Diagnostics (OBD I) was developed by the
California Air Resources Board (ARB) and implemented in 1988 to monitor some
of the emission control components on vehicles. As technology evolved and the
desire to improve the On-Board Diagnostic system increased, a new generation
of On-Board Diagnostic system was developed. This second generation of On-
Board Diagnostic regulations is called “OBD II”.
The OBD II system is designed to monitor emission control systems and key
engine components by performing either continuous or periodic tests of specic
components and vehicle conditions. When a problem is detected, the OBD II
system turns on a warning lamp (MIL) on the vehicle instrument panel to alert
the driver typically by the phrase of “Check Engine” or “Service Engine Soon”.
The system will also store important information about the detected malfunction
so that a technician can accurately nd and x the problem. Here below follow
three pieces of such valuable information:
1) Whether the Malfunction Indicator Light (MIL) is commanded ‘on’ or ‘off’;
2) Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
3) Readiness Monitor status.
2.2 Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are codes that are stored by the on-board
computer diagnostic system in response to a problem found in the vehicle. These
codes identify a particular problem area and are intended to provide you with a
Bekijk gratis de handleiding van ANCEL FX3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ANCEL |
| Model | FX3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2273 MB |
