ANCEL FX3000 handleiding
Handleiding
Je bekijkt pagina 23 van 28
17
FX3000 User's Manual
EN
7. Register & Update
Hardware Requirement:
1. A computer that can access the Internet.
2. A memory card reader/writer and a memory card that need to be updated.
There are 2 methods available: via memory card or via USB cable. Here we take
memory card for example to demonstrate how to update your tool:
1. Go to http://www.anceltech.com and click “Download” --> “FX3000”, then click
updating icon.
2. Download and install the update tool and launch the program when installed.
3. You will be prompted to type in the Serial Number (located at the back of the
tool) (Figure 7-1)
Figure 7-1
4. After the Serial Number is entered, click [Device Update] and enter the
following information. Click [Submit] (Figure 7-2).
Figure 7-2
(If you need the Register Code, proceed to the steps 5-8)
(If you have the Register Code, proceed to step 9 directly)
5. The Register Code can be found by connecting the supplied USB cable to the
tool and inserted into the computer.
6. When the tool has powered up, place cursor on the Help icon and press the
Bekijk gratis de handleiding van ANCEL FX3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ANCEL |
| Model | FX3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2273 MB |
