ANCEL FX3000 handleiding
Handleiding
Je bekijkt pagina 14 van 28
8
FX3000 User's Manual
4. Connection
4.1 Install memory card
1) Take out the memory card from package box.
2) Insert the memory card into the FX3000 memory card slot perpendicularly.
Make sure is fully inserted in the right place with the “micro” label facing
upward.
Note: You can hear a clicking sound if you insert the memory card in the right place.
Press the card slightly, it will be ejected automatically.
4.2 Connect FX3000
1. Turn the ignition off.
2. Locate vehicle’s DLC socket: It provides standard 16 pins and is generally
located on driver’s side, about 12 inches away from the center of dashboard.
See Figure 2-2. If DLC is not equipped under dashboard, a label indicating
its position will be given. In case no DLC is found, please refer to Automobile
Repair Manual.
3. Plug one end of the diagnostic cable into the OBD II 16 pin connector of
FX3000, and connect the other end to the vehicle’s DLC.
Diagnostic Cable
FX3000
Vehicle
Figure 4-2
4. Turn the ignition on. Engine can be off or running.
5. After nishing, the system will start initializing. After initialization, the system
will enter the main menu interface.
Bekijk gratis de handleiding van ANCEL FX3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ANCEL |
| Model | FX3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2273 MB |
