Handleiding
Je bekijkt pagina 24 van 64
24
OPERATION
When the set cooking time has elapsed, you will hear an alarm beep. Touch any
sensor to turn it o The alarm goes o automatically after 2 minutes.
To cancel the Timer touch (heat setting indicator will be brighter), then touch and
hold for 3 seconds and touch to activate the desired cooking zone, then touch
and use to reduce the time to “00” (see the chapter on how to set the timer
for instructions how to set single minutes and tens of minutes).
Kitchen Timer
Timer function can be used as an independent kitchen timer, which does not control
any of the cooking zones. To set a kitchen timer, follow all the steps of Timer set-
ting, but do not select any of the cooking zones, i.e. immediately after activating the
hob touch the Timer sensor and set the time. Kitchen timer activation will be
indicated with a ashing indicator light above the sensor. Cancel the timer in the
same way as you cancel the timer for a selected cooking zone.
Keep warm function
Keep warm function allows you to keep food warm on a cooking zone. The selected
cooking zone operates at a low heat setting. With this feature, ready to serve, warm
food retains its taste and does not stick to the pot's bottom. This function can be
used to melt butter or chocolate.
If you want the pot temperature to be accurately measured by the cooking
zone sensor, the pot used must be with a perfectly at base and suitable for
use with an induction hob (according to the manufacturer's instructions).
The Keep Warm function can be activated for any cooking zone. Each cooking
zone features 3 heat levels, i.e.:
• 42°C
• 70°C
• 94°C
Use the Keep Warm function:
• Place the cookware on the desired cooking zone.
• When cookware is automatically detected, touch the warm-up function sensor
, the display will show . This symbol indicates heat setting of 42°C.
• Touch the warm-up function sensor again, the display will show , the heat
setting is increased to 70°C.
• Touch the warm-up function sensor again, the display will show , the heat
setting is increased to 94°C.
• You can deactivate the warm-up function at any time by touching the cooking
zone sensor , slide your nger across the sensor to set the heat setting
to "0".
i
Bekijk gratis de handleiding van Amica PG4VI527AFTB4SAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | PG4VI527AFTB4SAC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4719 MB |
