Handleiding
Je bekijkt pagina 33 van 68
33
TROUBLESHOOTING
The cooking zone has
turned itself o.
The maximum operating
time has been reached.
Activate the cooking
zone again and set the
heat setting.
Noises are heard during
cooking.
Normal operation of the appliance. The noises emit-
ted depend on the pots used and the heat setting.
The “h” or “H” symbol is
shown on the cooking zone
display.
Normal operation of the appliance. The “h” or “H”
symbols indicate that the cooking zone is warm/hot
and extra care is required.
F0 is shown on the cooking
zone display.
Supplied voltage too low.
Contact your electricity
supplier.
F1 is shown on the cooking
zone display.
Supplied voltage too high.
Contact your electricity
supplier.
F2 is shown on the cooking
zone display.
Electronic protection has
been activated.
Check that the cool-
ing fan opening is not
obstructed.
F3 is shown on the cooking
zone display.
The cooking zone protec-
tion has been activated.
Remove the cookware
from the cooking zone
and wait until the F3
symbol goes o.
F4 , F5, F6, F7, F8 or F9
is displayed on the cooking
zone display.
External power interfer-
ence.
Unplug the appliance
from the power outlet for
120 seconds or discon-
nect the miniature circuit
breaker (MCB) or fuse in
your home electrical dis-
tribution box.
Cracked ceramic plate Danger! Immediately unplug the appliance from the
power supply or disconnect the miniature circuit
breaker (MCB) or fuse in your home electrical dis-
tribution box. Refer the repair to the nearest service
centre.
Bekijk gratis de handleiding van Amica KMI 776 660 C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | KMI 776 660 C |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5309 MB |
