Handleiding
Je bekijkt pagina 21 van 68
21
OPERATION
This function allows you to activate the demonstration mode and to limit the to-
tal maximum power of your induction hob to one of the following values: 2.8kW;
3.7kW; 4.5kW; 5.6kW; 7.35kW (maximum power).
You need to specify the total maximum power of your induction hob within
5 minutes of connecting the induction hob to the mains. To select a power
setting, touch to turn on the appliance and then touch and hold and
simultaneously for 3 seconds.
The twin display will show the previous setting or — if there was no previous setting
— the default setting of 7.35kW shown as “74”. Use and to select the desired
setting:
Within 10 seconds of selecting the desired setting, touch and hold for 3 seconds
to confirm.
You will hear a beep and the selected maximum power setting will flash
several times on the display and then the appliance will turn off. Now your op-
erating induction hob will not exceed the total maximum power you selected.
If you do not confirm the selected maximum power setting, your induction
hob will turn off and operate with the previously selected maximum power or
with the default power of 7.35kW.
When you select heat setting on individual cooking zones, the Power Management
circuit will ensure that the selected total maximum power is not exceeded. Any set-
ting that would cause the total maximum power to be exceeded will be unavailable
to the user.
The Power Management circuit may disable a cooking zone if using it would cause
the total maximum power of the appliance to be exceeded.
00 DEMO
28 2.8kW
37 3.7kW
45 4.5kW
56 5.6kW
74 7.35kW
Power management
Bekijk gratis de handleiding van Amica KMI 776 660 C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | KMI 776 660 C |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5309 MB |
