Handleiding
Je bekijkt pagina 20 van 64
20
OPERATION
Control Panel
● Immediately after the appliance is connected to electrical mains, all displays will light up
briey. Your induction hob is then ready for use.
● The induction hob is equipped with electronic touch control sensor elds, which are
operated by touching with a nger for at least 1 second.
● Touching of a sensor eld is accompanied by an acoustic signal to acknowledge.
No objects should be placed on the sensor elds (this could cause an error).
Touch sensor elds should be always kept clean.
Selecting the cooking zone heat setting
When the cooking zone display (3) shows pulsating "0" start setting the desired heat setting
by sliding your nger across the setting selection sensor eld (2).
Switch on the cooking zone
Once the appliance is switched on using the on/o touch sensor (1), select a cooking zone
(3) within the next 10 seconds.
1. When a cooking zone selection sensor eld (3) is touched, "0" on the corresponding heat
setting indicator display will pulsate.
2. To select the desired heat setting, slide your nger across the setting selection sensor
eld (2).
Switch on the appliance
To switch on the appliance touch and hold the on/o sensor eld (1) for at least 1 second.
The appliance is switched on when all heat setting displays (3) show "0".
If none of the sensor elds is touched within 10 seconds, the appliance switches
itself o.
If none of the sensor elds is touched within 10 seconds of switching on the
appliance, the cooking zone switches o.
A cooking zone is active when its display shows a digit or a letter. This indicates
the cooking zone is ready for the heat setting to be set or changed.
Bekijk gratis de handleiding van Amica KMI 63301 F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | KMI 63301 F |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4655 MB |
