Handleiding
Je bekijkt pagina 20 van 72
20
OPERATION
Booster “P” function
The Booster function makes it possible to in-The Booster function makes it possible to in-
crease power of a heating zone Ø 210 – from crease power of a heating zone Ø 210 – from
2100W to 3700W, and of zone Ø 260 – from 2100W to 3700W, and of zone Ø 260 – from
2600W to 3700W. 2600W to 3700W.
Activation of the Booster function should be Activation of the Booster function should be
performed as follows:performed as follows:
- Press the Booster function sensor, which - Press the Booster function sensor, which
is signalled by lighting up of the LED next to is signalled by lighting up of the LED next to
sensor (9),sensor (9),
- Then press sensor (+) (2) or sensor (-) (3) - Then press sensor (+) (2) or sensor (-) (3)
for a specic heating zone, which is signalled for a specic heating zone, which is signalled
by the appearance of „P” letter on the display, by the appearance of „P” letter on the display,
while the LED next to the display (9) switches while the LED next to the display (9) switches
o. The whole time „P” letter is on, the Booster o. The whole time „P” letter is on, the Booster
function is active. function is active.
The Booster function is switched off by The Booster function is switched off by
pressing sensor (-) (3) and reducing heating pressing sensor (-) (3) and reducing heating
power or by simultaneous pressing of sensor power or by simultaneous pressing of sensor
(+) (2) and sensor (-) (3), or after removing a (+) (2) and sensor (-) (3), or after removing a
pot from the heating zone.pot from the heating zone.
Adjusting heating power level of an induction zone
When the display of a heating zone (4) shows “0” and a decimal point you may start adjusting
the required level of heating power using sensor (+) (2) or () (3).
If within 10 seconds after the hob has been switched on no sensor has been
activated, the heating zones switch o.
The duration of the Booster function ope-
ration is limited by the sensor panel to 10
minutes. When the Booster function is au-
tomatically switched o, the heating zone
keeps working with nominal power.
The Booster function can be reactivated
provided that temperature sensors in elec-
tronic systems and coils allow that.
A heating zone is active when on the hob display a gure or letter and a decimal point
lights up, which means that the zone is ready for the heating power to be set up.
If a pot is removed from the heating
zone when the Booster function is in
operation, the function is still active
and time countdown will continue.
If the temperature of the heating
zone (its electronic system or a
coil) is exceeded when the Booster
function is activated, it is automati-
cally switched o. The heating zone
returns to the nominal power.
4
2
39 39
Bekijk gratis de handleiding van Amica KMI 13297 F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | KMI 13297 F |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5404 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Timer | Ja |
