Amica KMC 744 600 E handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 52
19
OPERATION
Limit the operating time
In order to increase e󰀩ciency, the hob is t-
ted with a operating time limiter for each of
the cooking zones. The maximum operating
time is set according to the last heat setting
selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched o󰀨 and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
Cooking heat
setting
Maximum operat-
ing time (hours)
1 10
2 5
3 5
4 4
5 3
6 2
7 2
8 2
9 1
The "H" residual heat indicator is
not displayed during a power out-
age. However, cooking zones may
still be hot!
Residual heat indicator
Heat energy that remains accumulated in the cooking zone after cooking is called the residual
heat. The appliance displays two di󰀨erent levels of residual heat. When a cooking zone tem-
perature is above 65°C and the cooking zone or the appliance is switched o󰀨, the relevant
cooking zone display will show the letter "H". Residual heat indication is displayed as long
as the cooking zone temperature exceeds 65°C.
When a cooking zone temperature is below 65°C the residual heat indication is turned o󰀨.
In the event of power outage when residual heat above 65°C is indicated, the residual heat
indicator will ash when power is resorted. Residual heat indicator continue to ash until the
maximum cooling time has elapsed or the cooking zone is selected and used.
When residual heat indicator is
on, do not touch the cooking
zone as there is a risk of burns
and do not place on it any items
sensitive to heat!
Turn o󰀨 the appliance
The appliance operates when at least one cooking zone is on. Touch and hold the cooking
zone selection / On/O󰀨 sensor eld (1) for about 3 seconds to turn of a desired cooking zone
or hold the sensor (1) for about 5 seconds to turn o󰀨 the appliance. The letter “H” appears on
the display (2) of the cooking zone the was used, symbolising residual heat.

Bekijk gratis de handleiding van Amica KMC 744 600 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAmica
ModelKMC 744 600 E
CategorieFornuis
TaalNederlands
Grootte3654 MB

Caratteristiche Prodotto

ApparaatplaatsingIngebouwd
Soort bedieningTouch
Kleur van het productBlack, Stainless steel
Aantal vermogenniveau's9
Ingebouwd displayJa