Handleiding
Je bekijkt pagina 36 van 100
- 36 -
INSTALLATION AND OPER-
ATING CONDITIONS OF THE
APPLIANCE
This refrigeration appliance is not intended for use as a built-in appliance.
Installation before using the appliance for the rst time
• Take the product out of the package, remove the scotch tape protecting the
door and the equipment. Any remaining adhesive stains may be removed
with a mild washing agent.
• Do not throw away the polystyrene elements of the packaging. If it is neces-
sary to transport the fridge-freezer, pack it in the polystyrene elements and
lm as well as protect ing it with scotch tape
• Clean the interior surface of the fridge- freezer and the elements of the
equipment with a washing agent dissolved in lukewarm water, then wipe it
dry.
• Place the fridge-freezer on an even, at and stable surface, in dry, aired and
shaded room, far from the heat sources such as: oven, hob, central heating
radiators, central heating pipes, hot water installation, etc.
• On the exterior surface of the product may be a protective foil, this foils
should be removed.
• Make sure the appliance is placed in a horizontal position by screwing in the
2 adjustable front legs (g. 3)
• To ensure that the door opens freely, the distance between the side of the
appliance (on door hinges side) and the wall is shown on gure 5.*
• Ensure adequate ventilation of the room and free air circulation from all sides
of the appliance (g. 6).*
• The appliance is equipped with spacers ensuring adequate distance to the
room wall and allowing for free air circulation. The spacers should be mount-
ed on the back of the appliance under the condenser in the two extreme
openings (g. 21) **
• Refrigerator should be placed against a wall with a free distance not exceed-
ing 75 mm
Minimum distances from the heat sources
• from the electric gas and other ovens - 30 mm,
• from oil or coal red ovens - 300 mm,
• from built-in ovens - 50 mm
If there is no possibility of ensuring the above- mentioned distances, provide an
appropriate insulation board.
Warning:
• The rear wall of the refrigerator, in particular, the condenser and other ele-
ments of the cooling system must not contact other elements, which may
damage them, (e.g. central heating pipes and the water supply pipes).
• It is forbidden to readjust or modify any parts of the unit. It is crucial not to
damage the capillary tube visible in the compressor recess. The tube may
not be bent, straightened or wound.
• If the capillary tube is damaged by the user the guarantee will be void (g.
8).
• In some models the handle is put into the appliance, You should screw it with
Bekijk gratis de handleiding van Amica FM135.4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Amica |
| Model | FM135.4 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8100 MB |
