American Standard Edgewater 4932410.002 handleiding
Handleiding
Je bekijkt pagina 3 van 4
- 3 -
6
7
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
SERVICE
CARE INSTRUCTIONS:
TEST INSTALLED FAUCET
5
M965716 Rev. 1.0 (2/16)
1
3
2
REMOVE
COLD
ON
OFF
HOT
1
2
3
4
5
6
• Move HANDLE (1) into “off” position.
• Turn on water supplies.
• Check connection for leaks. (See Section 4)
• With HANDLE (1) in “off” position, unthread
SPRAY (3) from HOSE (2).
• Operate handle back to front, in COLD
and HOT positions, to ush water lines
thoroughly.
• Replace SPRAY (3) onto HOSE (2).
If faucet drips, operate HANDLE several times from “off” to “on.” Do not apply excessive force.
Clogged CARTRIDGE outlets or inlets may cause reduced flow.
To clean, rst turn off water supply then:
• Loosen HANDLE SCREW (1) and remove HANDLE (2).
• Unthread the SNAP RING (3). Unthread three MOUNTING SCREWS (4).
• Lift CARTRIDGE (5) off MANIFOLD (6).
• Clean MANIFOLD (6) and CARTRIDGE (5) ports.
• Place CARTRIDGE (5) onto MANIFOLD (6) and
tighten MOUNTING SCREWS (4) alternately.
• Replace SNAP RING (3), HANDLE (2),
tighten HANDLE SCREW (1).
Bekijk gratis de handleiding van American Standard Edgewater 4932410.002, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Standard |
| Model | Edgewater 4932410.002 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 835 MB |