American DJ Vizi Hex Wash7 handleiding
Handleiding
Je bekijkt pagina 32 van 53
ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual Page 32
Vizi Hex Wash7 System Menu
Movement Speed - With this function you can set the pan and tilt movement speed.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Move. Speed” is displayed, and press
ENTER.
4. Either “Speed 1”, “Speed 2”, “Speed 3” or “Speed 4” will be displayed, use the
LEFT or RIGHT buttons to toggle between.
5. Press ENTER to conrm your selection or press MODE to exit.
Stand By - With this function the LEDs and step motors will power off if there is no DMX
signal within 15 mins (factory defualt). Once it receives a DMX signal, the xture will
reset itself.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Stand By” is displayed, and press ENTER.
4. The current stand by setting will be displayed, use the LEFT or RIGHT buttons to
adjust the hibernation period between 01M-99M or “Off”.
5. Press ENTER to conrm your selection or press MODE to exit.
Bekijk gratis de handleiding van American DJ Vizi Hex Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Vizi Hex Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5822 MB |
