American DJ Vizi Hex Wash7 handleiding
Handleiding
Je bekijkt pagina 29 van 53
ADJ Products, LLC - www.adj.com - Vizi Hex Wash7 Instruction Manual Page 29
Vizi Hex Wash7 System Menu
Function -
Status
Address via DMX - With this function you can adjust the DMX
address via external controller.
1. Press the MODE button to access the main menu. Press the UP or DOWN buttons
so that “Function” is highlighted, then press ENTER.
2. Press the LEFT or RIGHT buttons until “Status” is displayed, press ENTER.
3. Press LEFT or RIGHT buttons, until “Remote Add” is displayed, and press ENTER.
4. Either “O” or “On” will be displayed, use the UP and DOWN buttons to toggle
between.
5. Press ENTER to conrm your selection or press MODE to exit.
To use this function follow these instructions:
To adjust the address of your unit you must rst go to the address that it is currently set
to. From there you can adjust the address. First make sure all channels are set to the
value of “0”.
1. On your DMX controller set the DMX value of Channel 1 to the value “7”.
2. Now set the DMX value of Channel 2 to the value “7” to adjust the starting address
between 1 and 255. To adjust the address between 256 and 511 set Channel 2 to
the value “8”.
3. Set the DMX value of Channel 3 to your desired starting address. This will take
about 20 seconds before the unit accepts the new DMX address.
Bekijk gratis de handleiding van American DJ Vizi Hex Wash7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Vizi Hex Wash7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5822 MB |
