American DJ Vizi Beam RX2 handleiding
Handleiding
Je bekijkt pagina 12 van 36
12
Fixing
Plate
Lamp
LAMP REPLACEMENT
1. Power down the xture and disconnect from the power source. Allow at least 15 minutes for the
xture to cool, and make sure all components are cool enough to handle before beginning this
procedure. Loosen the four (4) screws on each half of the head casing, and remove both halves of
the casing.
2. Loosen the two (2) screws on the lamp pro-
tector plate located directly behind the lamp,
then remove the protector plate.
Follow the steps below to replace the Osram Sirius HRI discharge lamp.
3. Loosen the four (4) screws on the lamp x-
ing plate, then remove the plate. Remove the
lamp from its socket, disconnect the lamp, and
replace with a fresh unit. Re-assemble the unit
by reversing these steps.
Bekijk gratis de handleiding van American DJ Vizi Beam RX2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Vizi Beam RX2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4151 MB |
