American DJ Vizi Beam 12RX handleiding
Handleiding
Je bekijkt pagina 18 van 34
18
REMOTE DEVICE MANAGEMENT (RDM)
NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout
the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard
for lighting, allowing the DMX systems of the fixtures to be modified and monitored remotely. This
protocol is ideal for instances in which a unit is installed in a location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled
controller to send out a signal to devices on the wire, as well as allowing the fixture to respond
(known as a GET command). The controller can then use its SET command to modify settings that
would typically have to be changed or viewed directly via the unit’s display screen, including the DMX
Address, DMX Channel Mode, and Temperature Sensors.
Please be aware that not all RDM devices support all RDM features, and therefore it is important
to check beforehand to ensure that the equipment that you are considering includes all of the features
that you require.
The following parameters are accessible in RDM on this device:
Disc Unmute DMX Personality Description
Disc Unique Branch DMX Start Address
Disc Mute Identify Device
Device Info Reset Device
Manufacturer Label Sensor Denition
Device Label Sensor Value
Device Model Description Lamp State
Software Version Label Lamp Hours
Supported Parameters Pan Invert
Status Messages Tilt Invert
DMX Personality
Bekijk gratis de handleiding van American DJ Vizi Beam 12RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Vizi Beam 12RX |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5371 MB |
