American DJ Scene Setter 48 handleiding
Handleiding
Je bekijkt pagina 30 van 40
27
4. DMX Channels
1. Hold the Record button and press the Flash8 button 3 times. This will access the
DMX channel setup. The display screen will show the current channel.
2. Use the Up and Down buttons to scroll to the desired DMX channel (1 to 512).
3. Press the desired Flash button (1 to 24) to assign the DMX channel to a console
channel. The LED on that console channel will illuminate to indicate that it has
been selected.
4. Multiple DMX channels can be assigned to the same console channel, by
repeating steps 2 and 3 for each additional channel. Please note that all DMX
channels assigned to the same console channel will respond
5. Hold the Record button and press Exit to leave this setup mode.
REMOVE DMX CHANNEL
1. Use the Up and Down buttons to scroll to the DMX channel you want to remove.
2. Press the Blackout button. The channel is now removed.
ADD/ASSIGN DMX CHANNEL
ASSIGN ALL CONSOLE CHANNELS TO A SINGLE DMX CHANNEL
1. Use the Up and Down buttons to scroll to the desired DMX channel.
2. Press the Full On button. All console channel are now tied to a single DMX
channel.
4.1 DMX Channel Setup
Bekijk gratis de handleiding van American DJ Scene Setter 48, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Scene Setter 48 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3092 MB |
