American DJ PAR Z300 RGBA handleiding
Handleiding
Je bekijkt pagina 9 van 32
9
INSTALLATION GUIDELINES
FLAMMABLE MATERIAL WARNING
Keep xture minimum 3.3 feet (1m) away from ammable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualied electrician should be used for all electrical connections and/or installations.
WHEN POWER LINKING, ONLY CONNECT THIS FIXTURE TO OTHER FIXTURES OF THE
SAME MAKE AND MODEL. NEVER MIX UNITS. CHECK SILK SCREEN FOR MAX AMPS.
MINIMUM DISTANCE BETWEEN OBJECTS MUST BE 1.0 FEET (0.3 METERS)
MAXIMUM TEMP OF EXTERNAL SURFACE 194°F (90°C)
MINIMUM DISTANCES TO ILLUMINATED OBJECTS 1.6 FEET (0.5M)
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
Fixture MUST be installed following all local, national, and country commercial electrical and construction
codes and regulations.
Before rigging/mounting a single xture or multiple xtures to any metal truss/structure or placing the
xture(s) on any surface, a professional equipment installer MUST be consulted to determine if the
metal truss/structure or surface is properly certied to safely hold the combined weight of the xture(s),
clamps, cables, and accessories.
Fixture ambient operating temperature range is -4° to 113°F. (-20° to 45°C).
Do not Use xture under or above this temperature.
Fixture(s) should be installed in areas outside walking paths, seating areas, or away from areas were
unauthorized personnel might reach the xture by hand.
NEVER stand directly below the xture(s) when rigging, removing or servicing.
Overhead xture installation must always be secured with a secondary safety attachment, such as an
appropriately rated safety cable.
Allow approximately 15 minutes for the xture to cool down before servicing.
RIGGING
Overhead rigging requires extensive experience, including among others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the xture. If you lack these qualications, do not attempt the installation yourself.
Improper installation can result in bodily injury.
OPERATIONAL BREAKS
Duty Cycle - It is strongly recommended to power the fixture down completely when not in use.
Doing so will reduce wear on the fixture due to sustained or extended operational periods,
thereby maximizing the fixture’s operational lifespan.
Bekijk gratis de handleiding van American DJ PAR Z300 RGBA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | PAR Z300 RGBA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3775 MB |
