American DJ PAR Z300 6K handleiding
Handleiding
Je bekijkt pagina 19 van 26
19
DMX SETUP
Power Supply: The PAR Z300 6K incorporates an electronic ballast, which automatically
Special Note: Line Termination: When using longer runs of cable, one may need to use a terminator on
the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4-watt resistor, which connects
between pins 2 and 3 of a male XLR connector (DATA + and DATA -). Insert this unit into the female XLR
connector of the last unit in one’s daisy chain to terminate the line. Using a cable terminator (ADJ part
number Z-DMX/T) will decrease the possibilities of erratic behavior.
5-Pin XLR DMX Connectors: Some manufacturers use 5-pin DMX-512 data cables for DATA transmission
instead of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard
5-pin data cables into a 3-pin line, use a cable adaptor, readily available at most electric stores. The
chart below details a proper cable conversion.
Bekijk gratis de handleiding van American DJ PAR Z300 6K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | PAR Z300 6K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2927 MB |
