American DJ Hydro Wash X7 handleiding
Handleiding
Je bekijkt pagina 37 van 42
UPDATING SOFTWARE
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION! NOTE ALL MENU
SETTINGS BEFORE UPDATING SOFTWARE! FIXTURE SOFTWARE CAN NOT BE DOWNGRADED!
DOWNLOAD FIXTURE SOFTWARE TO PC ONLY! (NO MAC SUPPORT) PLEASE NOTE, UP TO 32
UNITS CAN BE DAISY CHAINED TOGETHER AND UPDATED AT THE SAME TIME.
PLEASE CONTACT ADJ CUSTOMER SERVICE FOR FURTHER INFORMATION.
1. Contact ADJ Customer Service to obtain the software update les.
2. Copy the software les to a compatible USB ash drive.
NOTE: MAKE SURE THESE SOFTWARE FILES ARE THE ONLY FILES LOADED ONTO THE
USB FLASH DRIVE.
3. Disconnect DMX and WiFly connections and power the xture ON.
4. Insert the USB ash drive into the SERVICE PORT located on the rear panel of the unit.
5. Locate “PERSONALITY” within the system menu and press ENTER. Scroll to the “SERVICE”
submenu and press ENTER. Enter the passcode “50” to gain access.
6. Scroll to the “USB PORT POWER” setting and activate the USB service port by selecting ON.
NOTE: The USB port is OFF by default.
7. After activating the USB port, scroll to “UPDATE SOFTWARE” and press ENTER.
8. Two (2) software les will be displayed as downloaded earlier. Highlight the rst le and press
ENTER. Select YES to begin the rst of two updating processes. Once YES is selected the display
will show “Updating, Please wait...”. A percentage bar will also be displayed.
9. After the rst update is complete, the xture will run a software check (this can take some time).
10. After the software check is complete, the xture will perform a reset.
11. Once the reset is complete, scroll to the “PERSONALITY” menu again and press ENTER. Scroll
to the “SERVICE” submenu and press ENTER. Enter the passcode “50” to gain access.
12. Reactivate the USB port power if necessary.
13. Scroll to “UPDATE SOFTWARE” setting again and press ENTER.
14. Highlight the second le this time and press ENTER. Select YES to begin the second and nal
updating process. Once YES is selected the display will show “Updating, Please wait...”. A
percentage bar will also be displayed.
15. After the second update is complete, the xture will run a software check again.
16. After the software check is complete, the xture will perform another reset.
17. Remove the USB ash drive.
18. After the reset process is complete check the new software version to conrm it is updated to the
most recent software.
MULTIPLE UNIT POWER LINKING
With this feature you can connect the xtures to one another using the power cable input and output sockets.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES AS THE POWER CONSUMPTION
OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON THIS FIXTURE!
CHECK SILK SCREEN FOR MAX AMPS.
37
Bekijk gratis de handleiding van American DJ Hydro Wash X7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Wash X7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8463 MB |
