American DJ Hydro Profile handleiding
Handleiding
Je bekijkt pagina 15 van 44
15
GOBOS
1. Place the device on a at, stable surface, and allow the device to cool down for at least 1 hour
before beginning this procedure.
2. Engage both the pan and tilt locks, and remove the head covers.
3. Locate the gobo module (second module from the bottom, as shown in the illustration below).
Disconnect any electrical connectors linking the module to the xture head, and remove the
screws holding the module in place. Slide the module out of the head.
4. Pull the gobo holder away from the gobo wheel, then gently slide it outwards. Use a pair of
needle nose pliers to carefully remove the retainer spring from the gobo holder. The gobo can
now be removed from the gobo holder, and replaced with a new gobo. Reassemble by reversing
these steps.
GOBO REPLACEMENT
Bekijk gratis de handleiding van American DJ Hydro Profile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Profile |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5362 MB |
