American DJ Hydro Beam X2 handleiding
Handleiding
Je bekijkt pagina 32 van 44
32
SYSTEM MENU
DMX SETTINGS The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX Channel
Mode, No DMX Status, and Select Signal.
• DMX ADDRESS - In this submenu you can use the UP or DOWN buttons to adjust and nd your desired
DMX address.
• DMX CHANNEL MODE - In this submenu you can use the UP or DOWN buttons to nd your desired DMX
channel mode.
• NO DMX STATUS - This submenu setting is used as a precaution mode in case the DMX signal is lost or
interrupted. The operating mode chosen in this submenu is the running mode the xture will go into when the
DMX signal is lost. Listed below are the 2 modes.
• HOLD - This setting will have the xture stay in the last DMX setup.
• BLACKOUT - This setting will have the xture automatically go into stand by mode.
• MANUAL - This setting will go into the current manual control set up. See MANUAL CONTROL.
PERSONALITY - The submenus listed under PERSONALITY are as follows: Select Signal, Status Settings, WiFly
Settings, Reset Motors, Display, and Service.
• SELECT SIGNAL - In this submenu you can select your desired DMX control mode:
• DMX - Control the unit via DMX cable connection.
• WiFly - Control the unit via WiFly connection.
• WiFly / DMX Out - Control the unit via WiFly connection. The DMX signal is sent to the next unit via DMX cable.
• STATUS SETTINGS - In this submenu you are able to access and adjust/change: Pan Invert, Tilt Invert, P./T.
Feedback, Pan Degree, P./T. Speed, and Hibernation.
• WIFLY SETTINGS - In this submenu you are able to access and adjust/change: WiFly Channel and Enable/
Disable WiFly.
• RESET MOTORS - In this submenu you are able to reset selected motors.
• DISPLAY - In this submenu you are able to access and adjust/change: Backlight Intensity, Display Invert, Screen
Saver Delay, and Display Lock.
• SERVICE - In this submenu you are able to access and adjust/change: the calibration (effect adjust) and restore
the factory settings.
MANUAL CONTROL This menu is for manual testing and manual control. Pan, tilt, color wheel, gobo wheel,
gobo rotation, prism 1, prism 1 rotation, prism 2, prism 2 rotation, shutter, dimmer, frost, and focus can all be
tested/adjusted.
INFORMATION - The submenus listed under INFORMATION are as follows: Fixture Life Time, Total Lamp
Time, Fixture Temps, Humidity, Fan Info. (RPM), DMX Values, Error Logs, and Software Version.
FIXTURE LIFE TIME
• Power On Time -The TOTAL power ON running time of the unit is displayed. This time CANNOT be reset.
Reminder: The displayed time represents the TOTAL POWER ON time.
• P-On Time-R - The CURRENT power ON running time of the unit is displayed. This running time may not be
the same as the total power ON running time displayed under “Power On Time”. This time CAN be reset.
Reminder: The displayed time represents the CURRENT POWER ON TIME since the last reset.
• P-On Time Reset - Reset the CURRENT power ON running time that is displayed under “P-On Time-R”.
TOTAL LAMP TIME
• Lamp On Time - The TOTAL Lamp ON time is displayed. This total lamp ON time CANNOT be reset.
Reminder: The displayed time represents the TOTAL LAMP ON time.
• Lamp On Time-R - The CURRENT LED ON running time is displayed. This running time may not be the
same as the total lamp ON time displayed under “Lamp On Time”. This total lamp ON time CAN be reset.
Reminder: The displayed time represents the CURRENT LAMP ON time since the last reset.
• Lamp On Time Reset - With this function you can reset the CURRENT lamp ON time that is displayed under
“Lamp On Time-R”.
• LampLifeTime - With this function you can check the current lamp life percentage.
Bekijk gratis de handleiding van American DJ Hydro Beam X2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11067 MB |
