American DJ Hydro Beam X1 handleiding
Handleiding
Je bekijkt pagina 13 van 42
13
DISCHARGE LAMP WARNING
LAMP REPLACEMENT WARNING
NOTE: The lamp life is represented in “Percentages”.
When the lamp reaches 15% life remaining, the unit’s display will flash the following message:
“Replace The Lamp Soon”. This message will flash for up to 10 minutes. To conrm this warning
and return to normal operation, press the ENTER button.
When the lamp reaches 10% life remaining, the unit’s display will again flash the following
message: “Replace The Lamp Soon”. This message will flash for up to 10 minutes. To conrm this
warning and return to normal operation, press the ENTER button.
NOTE: When the fixture is powered OFF and then back ON again, the fixture display will flash the fol-
lowing message: “Replace The Lamp Soon”.
When the lamp reaches 0% to 5% life remaining, the unit’s display will flash the following mes-
sage: “Replace The Lamp Immediately”. The unit will now NO longer respond to DMX com-
mands, and it will enter hibernation mode. This will disable all xture functionality with the excep-
tion of a few menu commands. The xture will continue to enter into hibernation mode when powered
on until the lamp is replaced and the lamp time (LAMP ON TIME-R) has been reset, as detailed in the
System Menu section of this manual.
NOTE: After replacing the lamp, the lamp time MUST be reset. The lamp time must be reset to gain
access to the full system menu.
Bekijk gratis de handleiding van American DJ Hydro Beam X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6603 MB |
