American DJ Hydro Beam X12 handleiding
Handleiding
Je bekijkt pagina 9 van 41
SAFETY GUIDELINES
RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV
RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH OF
ULTRAVIOLET UV LIGHT FROM THE UV COLOR FILTER. WEAR
PROPER EYE AND SKIN PROTECTION. AVOID PROLONGED
PERIODS OF EXPOSURE TO UV COLOR FILTER. AVOID WEARING
WHITE COLOR CLOTHING AND/OR USING UV PAINTS ON SKIN.
AVOID DIRECT EYE AND/OR SKIN
EXPOSURE AT DISTANCES LESS THAN 11 feet (3.3m). DO NOT OPERATE FIXTURE WITH
DAMAGED/MISSING EXTERNAL COVERS. DO NOT LOOK DIRECTLY INTO THE UV LIGHT AND/
OR VIEW UV LIGHT DIRECTLY WITH OPTICAL INSTRUMENTS THAT MAY CONCENTRATE THE
LIGHT/RADIATION OUTPUT. INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS,
SUNLIGHT EXPOSURE DIS-ORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION,
MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET UV LIGHT EMITTED FROM
THE UV LED.
DO NOT TOUCH the xture housing during operation. Turn OFF the power and allow approximately 15
minutes for the xture to cool down before servicing.
DO NOT shake xture; avoid brute force when installing and/or operating xture.
DO NOT operate xture if the power cord has become frayed, crimped, damaged and/or if any of the
power cord connectors are damaged and do not insert into the xture securely with ease.
NEVER force a power cord connector into the xture. If the power cord or any of its connectors are
damaged, replace it immediately with a new one of similar power rating.
DO NOT block any air ventilation slots; these must remain clean and never blocked. Allow approx. 7.9”
(20cm) between xture and other devices or a wall for proper cooling.
When installing xture in a suspended environment, always use mounting hardware that is no less than
M10 x 25 mm, and always attach an appropriately rated safety cable.
ALWAYS disconnect xture from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end; never pull out the plug by tugging the
wire portion of the cord.
During the initial operation of this xture, a light smoke or smell may emit from the interior of the xture.
This is a normal process and is caused by excess paint in the interior of the casing burning off from the
heat associated with the lamp and will decrease gradually over time.
Consistent operational breaks will ensure xture will function properly for many years. ONLY use the
original packaging and materials to transport the xture in for service.
9
Bekijk gratis de handleiding van American DJ Hydro Beam X12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7518 MB |
