American DJ Hydro Beam X12 handleiding
Handleiding
Je bekijkt pagina 20 van 41
FIXTURE INSTALLATION
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
without any deformation. When installing the unit must be secured with a secondary safety attachment,
e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or
servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and periodic safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
These installations should be checked by a skilled person once a year.
*SIDE MOUNTING
TO MAINTAIN IP65 RATING
INTEGRITY, FIXTURE MUST
BE INSTALLED WITH CABLES
FACING THE GROUND AT ALL
TIMES. WATER MUST EASILY
RUN OFF AND NOT COLLECT
AROUND CABLE CONNECTIONS.
*SAFETY CABLE
ALWAYS ATTACH A SAFETY
CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF THE
CLAMP FAILS.
The Hydro Beam X12 is fully operational in three different mounting positions, hanging upside-down,
mounted sideways on trussing, or set on a at level surface. Be sure this xture is kept at least 0.2m
(7.9in.) away from any ammable materials (decoration etc.). Always use and install the supplied safety
cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails (see
next page). Never use the carrying handles for secondary attachment.
20
Bekijk gratis de handleiding van American DJ Hydro Beam X12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Hydro Beam X12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7518 MB |
