American DJ FOCUS SPOT 4Z PEARL handleiding

Niet gecategoriseerd

American DJ

32 pagina's

PDF beschikbaar

Handleiding

SYSTEM MENU

AUTO PROGRAM - This function allows the internal programs to run in either a stand-alone or primary/

secondary mode. In “Primary” mode, the xture will send DMX data to other xtures connected via

DMX cable. In “Alone” mode, the xture will operate as a single xture. The program for this mode is

selected in the “Program” section of the control menu. You can set the number of steps under “Edit.

Prog”. You can edit the individual scenes under “Edit Scenes”.

1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Function”,

then press ENTER.

2. Use the UP/DOWN buttons to select “Disp.Set”, then press ENTER.

3. Use the UP/DOWN buttons to highlight “Auto. Prog” and press ENTER.

4. Either “Primary” or “Alone” will be displayed. Use the UP/DOWN buttons to scroll through settings.

5. Press the ENTER button to conrm your selection, or press the MODE button to exit.

DEFAULT SETTINGS - Use this function to restore factory settings.

1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to “Function”,

then press ENTER.

2. Use the UP or DOWN buttons to select “DFSE”, then press ENTER.

3. Depending on setting, either “Off” or “On” will be displayed. Select “On” to restore xture to factory

settings.

4. Press the ENTER button to conrm your selection, or press the MODE button to exit.

USB UPGRADE FILE - This submenu is used for any future software updates. Check www.adj.com

and this units webpage for any software updates. Download the software update to a ash stick and

plug the ash stick into the Service Port slot located on the front of the unit.

1. Contact ADJ customer service for help when updating software.

TIME INFO - Use this function to check current running time, total running time, and last clear time. This

submenu also allows a user to clear/set “Total Time” and “Last Time” hours.

1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to

“Information”, then press ENTER.

2. Use the UP or DOWN buttons to select “Time.Info”, then press ENTER.

3. Use the UP or DOWN buttons to scroll through Time Information selections:

• “Current Time” - This will display the current xture run time in hours. Press the MODE button to

exit.

• “Total Time” - This displays the total xture run time in hours. Press the MODE button to exit.

• “Last Time” - This displays the last time the run time was cleared. Press the MODE button to exit.

• “Time PIN” - Use this function to enable clearing of “Last Time” and “Total Time” functions.

• “Clear Last” - Use this function to clear “Last Time” counter. Access “Time PIN” and press ENTER.

Use the UP/DOWN buttons to set “PIN” to “050” and press ENTER. Return to the “Clear Last”

function and press ENTER. Press LEFT/RIGHT buttons until selection is displayed and press

ENTER to conrm. “ON” will clear the time. “OFF” returns user to Time Menu display.

• “Clear Total” - Use this function to clear “Total Time” counter. Access “Time PIN” and press

ENTER. Use the UP/DOWN buttons to set “PIN” to “060” and press ENTER. Return to the “Clear

Total” function and press ENTER. Press LEFT/RIGHT buttons until selection is displayed and press

ENTER to conrm. “ON” will clear the time. “OFF” returns user to Time Menu display.

TEMPERATURE INFO - Use this function to display moving head temperature.

1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to

“Information”, then press ENTER.

2. Use the UP or DOWN buttons to select “Temp. Info”, then press ENTER.

3. “T:XXX” is displayed. “XXX” represents the current temperature of the moving head.

4. Press the ENTER or MODE button to exit.

FAN SPEED - Use this function to adjust the base fan speed.

1. Press the MODE button to access the main menu. Use the UP/DOWN buttons to scroll to

“Information”, then press ENTER.

2. Use the UP or DOWN buttons to select “Fan Speed”, then press ENTER.

3. The current fan speeds for “Fan1” and “Fan2” will be displayed.

4. Press the ENTER or MODE button to exit.

Bekijk gratis de handleiding van American DJ FOCUS SPOT 4Z PEARL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.