American DJ Focus Flex L7 handleiding
Handleiding
Je bekijkt pagina 16 van 34
16
DMX ADDRESSING
All xtures should be given a DMX starting address when using a DMX controller, so the correct xture
responds to the correct control signal. This digital starting address is the channel number from which
the xture starts to “listen” to the digital control signal sent out from the DMX controller. The assignment
of this starting DMX address is achieved by setting the correct DMX address on the digital control
display on the xture.
You can set the same starting address for all xtures or a group of xtures, or set different addresses for
each individual xture. Setting all xtures to the same DMX address will cause all xtures to react in the
same way, in other words, changing the settings of one channel will affect all the xtures simultaneously.
If you set each xture to a different DMX address, each unit will start to “listen” to the channel number
you have set, based on the quantity of DMX channels of each xture. That means changing the settings
of one channel will only affect the selected xture. In the case of the Focus Flex, when in 16 Channel
mode, you should set the starting DMX address of the rst unit to 1, the second unit to 17 (1 + 16), the
third unit to 33 (17 + 16), the fourth unit to 49 (33 + 16), etc...
Channel Mode Unit 1 Address Unit 2 Address Unit 3 Address Unit 4 Address
Basic:
16 Channels
1 17 33 49
Standard:
25 Channels
1 26 51 76
Extended 3:
34 Channels
1 35 69 103
Extended 5:
42 Channels
1 43 85 127
Extended 7:
50 Channels
1 51 101 151
Standard CMY:
25 Channels
1 26 51 76
Extended CMY:
28 Channels
1 29 57 85
Bekijk gratis de handleiding van American DJ Focus Flex L7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American DJ |
| Model | Focus Flex L7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4374 MB |
