American DJ Encore Burst 100 IP handleiding

Niet gecategoriseerd

American DJ

22 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 19

Encore Burst 100 IP Trouble Shooting

Encore Burst 100 IP Cleaning

Listed below are a few common problems the user may encounter, with solutions.

Unit not responding to DMX:

1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on

some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right

connectors; it does matter which way the inputs and outputs are connected.

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be car-

ried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every 20 days.

3. Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-

due, dust, dew).

Encore Burst 100 IP Dimensional Drawings

9.8” / 249mm

9.21” / 234mm

12.12” / 308mm

6” / 153mm

Bekijk gratis de handleiding van American DJ Encore Burst 100 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.