American DJ Encore Burst 100 IP handleiding

Niet gecategoriseerd

American DJ

22 pagina's

PDF beschikbaar

Handleiding

ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 16

Encore Burst 100 IP Operating Instructions

LED On Time - With this function you are able to check the total LED ON time. This total

LED On time can NOT be reset.

NOTE: The displayed time represents the total LED ON time.

1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed and press ENTER.

2. Press the UP or DOWN buttons until “Total LED Time” is displayed and press ENTER.

3. Press the UP or DOWN buttons until “LED On Time” is displayed and press ENTER.

4. The total power ON running time of the xture will now be displayed. Press the MENU button to

exit.

LED On Time-R - With this function you are able to check current LED ON running time

of the unit. This running time may not be the same as the total LED ON time displayed under

“LED ON TIME”. This total LED ON time CAN be reset.

NOTE: The displayed time represents the current LED ON time since the last reset.

1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed and press ENTER.

2. Press the UP or DOWN buttons until “Total LED Time” is displayed and press ENTER.

3. Press the UP or DOWN buttons until “LED On Time-R” is displayed and press ENTER.

4. The power ON running time of the xture will now be displayed. Press the MENU button to exit.

LED Time Reset - With this function you can reset the current LED ON time that is

displayed under “LED ON TIME-R”.

1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed and press ENTER.

2. Press the UP or DOWN buttons until “Total LED Time” is displayed and press ENTER.

3. Press the UP or DOWN buttons until “LED Time Reset” is displayed and press ENTER.

4. Use the UP or DOWN buttons to set the pass code to “50” and press ENTER. The LED ON TIME-R

will now be reset to “0”.

Current - With this function you can check the current temperature of the xture.

1. Press either the MENU, UP, or DOWN buttons until “Information” is displayed and press ENTER.

2. Press the UP or DOWN buttons until “Fixture Temps” is displayed and press ENTER.

3. Press the UP or DOWN buttons until “Current” is displayed and press ENTER.

4. The xtures current temperature will now be displayed. Press the UP or DOWN buttons to switch

between farenheit and celsius. Press the MENU button to exit.

Bekijk gratis de handleiding van American DJ Encore Burst 100 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.