American DJ COB Cannon LP200X handleiding

Niet gecategoriseerd

American DJ

38 pagina's

PDF beschikbaar

Handleiding

REMOTE DEVICE MANAGEMENT (RDM)REMOTE DEVICE MANAGEMENT (RDM)

NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout the

entire system, including DMX data splitters and wireless systems.

Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for

lighting, allowing the DMX systems of the xtures to be modied and monitored remotely. This proto-col

is ideal for instances in which a unit is installed in a location that is not easily accessible.

With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled con-troller

to send out a signal to devices on the wire, as well as allowing the xture to respond (known as a GET

command). The controller can then use its SET command to modify settings that would typically have to

be changed or viewed directly via the unit’s display screen, including the DMX Address, DMX Channel

Mode, and Temperature Sensors.

FIXTURE RDM INFORMATION:

RDM Code Device ID Device Model ID Personality ID

1900 00000-1869F 4800

5CH, 8CH-A, 8CH-B, 9CH, 10CH-A,

10CH-B, 12CH, 13CH, 16CH, 20CH

Please be aware that not all RDM devices support all RDM features, and therefore it is important

to check beforehand to ensure that the equipment that you are considering includes all of the features

that you require.

CODE PARAMETER

0x0001 Disc Unique Branch

0x0002 Disc Mute

0x0003 Disc Un Mute

0x0050 Supported Parameters

0x0060 Device Info

0x0081 Manufacturer Label

0x0082 Device Label

0x00C0 Software Version Label

0x00E0 DMX Personality

0x00F0 DMX Start Address

0x0201c Sensor Value (Temperature)

0x0343 Curve

0x0344 Curve Description

0x1000 Identify Device

0x0141 DMX Fail Mode

Bekijk gratis de handleiding van American DJ COB Cannon LP200X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.