American DJ COB Cannon LP200STX handleiding

Niet gecategoriseerd

American DJ

39 pagina's

PDF beschikbaar

Handleiding

REMOTE DEVICE MANAGEMENT (RDM)

NOTE: for RDM to work properly, RDM enabled equipment must be used throughout the entire

system, including DMX data splitters and wireless systems.

Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for

lighting, allowing the DMX systems of the xtures to be modied and monitored remotely. This protocol

is ideal for instances in which a unit is installed in a location that is not easily accessible.

With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled controller

to send out a signal to devices on the wire, as well as allowing the xture to respond (known as a GET

command). The controller can then use its SET command to modify settings that would typically have to

be changed or viewed directly via the unit’s display screen, including the DMX Address, DMX Channel

Mode, and Temperature Sensors.

FIXTURE RDM INFORMATION:

Please be aware that not all RDM devices support all RDM features, and therefore it is important

to check beforehand to ensure that the equipment that you are considering includes all of the features

that you require.

The following parameters are accessible in RDM on this device:

RDM Code Device ID

Device Model ID

Personality ID

1900 00000-1869F 4801

5Ch, 8Ch-A, 8Ch-B, 9Ch, 10Ch-A, 10Ch-B,

12Ch, 13Ch, 16Ch, 20Ch

RDM Parameter Code

Disc Unique Branch 0x0001

Disc Mute 0x0002

Disc Un Mute 0x0003

Supported Parameters 0x0050

Device Info 0x0060

Manufacturer Label 0x0081

Device Label 0x0082

Software Version Label 0x00C0

DMX Personality 0x00E0

DMX Start Address 0x00F0

Sensor Value 0x0201c

Curve 0x0343

Curve Description 0x0344

Identify Device 0x1000

DMX Fail Mode 0x0141

Bekijk gratis de handleiding van American DJ COB Cannon LP200STX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.