American DJ COB Cannon LP200ST handleiding

Niet gecategoriseerd

American DJ

34 pagina's

PDF beschikbaar

Handleiding

DMX SETUP

DMX ADDRESSING

All fixtures should be given a DMX starting address when operating with a DMX controller, in order to

ensure that the correct fixture responds to the correct control signal. This digital starting address is

the channel number from which the fixture starts to “listen” to the digital control signal sent out from

the DMX controller. The starting DMX address is configured by setting the correct DMX address on

the control panel display on the fixture.

You can set the same starting address for multiple fixtures, or set different addresses for each indi-

vidual fixture. Setting multiple fixtures to the same DMX address will cause all those fixtures to react

in the same way. In this case, please note that changing the settings of one channel will affect all the

fixtures simultaneously.

If you set each fixture to a different DMX address, each unit will start to “listen” to the channel num-

ber you have set, based on the quantity of DMX channels of each fixture. That means changing the

settings of one channel will only affect the selected fixture.

As an example, when operating this device in 5 channel mode, you should set the starting DMX

address of the first unit to 1, the second unit to 6 (1 + 5), the third unit to 11 (1 + 5 + 5), and so on.

(See the chart below for more details.)

Channel Mode Unit 1 Address Unit 2 Address Unit 3 Address Unit 4 Address

5-channel

1 6 11 16

8A / 8B-channel

1 9 17 25

9-channel

1 10 19 28

10A / 10B

channel

1 11 21 31

12-channel

1 13 25 37

13-channel

1 14 27 40

16-channel

1 17 33 49

20-channel

1 21 41 61

Bekijk gratis de handleiding van American DJ COB Cannon LP200ST, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.