American Audio Shooting Star LED handleiding

Niet gecategoriseerd

American Audio

10 pagina's

PDF beschikbaar

Handleiding

©American DJ® - www.americandj.com - Shooting Star LED Instruction Manual Page 10©American DJ® - www.americandj.com - Shooting Star LED Instruction Manual Page 9

SHND - Show modes 0 - 8 (Factory shows) For Show Mode to

run properly, make sure Sound Active mode is off.

1. Tap the MENU button until “SHND” is displayed, press ENTER.

2. “Sh X” will now be displayed, “X” representing a number

between 0-8. Shows 1 - 8 are preset shows, while “Sh 0” is

a random show. Press the UP or DOWN buttons to nd your

desired show.

3. Press ENTER, and then press and hold the MENU button for

at least 3 seconds to conrm.

SOUN - In this mode you can run in sound active mode.

1. Tap the MENU button until “SOUN” is displayed, press ENTER.

2. Either “ON” or “OFF” will now be displayed. Press the UP or

DOWN buttons to select one or the other.

3. When you have made your selection, press the ENTER, and

then press and hold the MENU button for at least 3 seconds to

conrm.

BLND - This will control blackout

1. Tap the MENU button until “BLND” is displayed, press ENTER.

2. Either “YES” or “NO” will now be displayed. Press the UP or

DOWN buttons to select one or the other.

3. Press the ENTER, and then press and hold the MENU button

for at least 3 seconds to conrm.

LED - With this function the LED display will turn off after 2

minutes.

1. Tap the MENU button until “LED” is displayed, press ENTER.

2. Either “ON” or “OFF” will now be displayed. Press the UP or

DOWN buttons to select “ON” to keep the LED display on at all

times, or “OFF” to allow the LED display to turn off after 2 min-

utes. Press any button to turn on the LED display again.

3. Press the ENTER, and then press and hold the MENU button

for at least 3 seconds to conrm.

DISP - This will “ip” the LED display

1. Tap the MENU button until “DISP” is displayed, press ENTER.

2. Press the UP button to select “DISP” to activate this function,

or “DSIP” to deactivate this function.

3. Press ENTER to conrm.

TEST - This function can run a self test program.

1. Tap the MENU button until “TEST” is displayed, press ENTER.

2. The xture will now run a self test.

FHRS - With this function you can display the running time

of the unit.

1. Tap the MENU button until “FHRS” is displayed, press ENTER.

2. The running time of the xture will now be displayed. Press

MENU to exit.

VER - This will display the software version

1. Tap the MENU button until “VER” is displayed. Press the ENTER

button and the software vesion will be displayed.

2. Press the MENU button to leave this function.

RSET - Use this function to reset the unit.

1. Tap the MENU button until “RSET” is displayed, press ENTER.

2. The xture will now reset.

Shooting Star LED System Menu Shooting Star LED System Menu

Bekijk gratis de handleiding van American Audio Shooting Star LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.