American Audio Royal Sky handleiding
Handleiding
Je bekijkt pagina 7 van 12
ADJ Products, LLC - www.adj.com - Royal Sky Instruction Manual Page 14ADJ Products, LLC - www.adj.com - Royal Sky Instruction Manual Page 13
System Menu: When conrming your setting press ENTER
and then hold MENU for at least 2-3 seconds, or you can
wait 1 minute for automatic setup. To exit without making
any adjustments press the MENU button.
ADDR - DMX Address Setting via control board -
1. Press the MENU button until “ADDR” is displayed, press ENTER.
2. “X” will now be displayed, “X” represents the displayed address.
Press the UP or DOWN buttons to nd your desired address.
3. Press ENTER to conrm, then connect your DMX controller.
NOTE: If after you connect your DMX controller the unit does not fall
into DMX mode, press and hold the MENU button for at least 3 sec-
onds.
SLND - This will let you set unit as a slave in a master/
slave conguration.
1. Press the MENU button until “SLND” is displayed, press ENTER.
Either “SL 1” or “SL 2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to conm.
NOTE: In a Master/Slave conguration you can make one xture the
Master and then set the next xture to “SL 2”, the xtures will now
have contrast movement to each other.
SHND: SH 0 - SH 18 - Show modes 0-18 (Factory
programs) Show Mode can run with or without sound active
mode on. With sound active mode on, the shows will tend to
run faster.
1. Press the MENU button until “SHND” is displayed, press ENTER.
2. “SH X” will now be displayed, “X” representing a number between
0-18. Shows 1-18 are preprogrammed shows, while “SH 0” is random
show mode. Press the UP or DOWN buttons to nd your desired show.
3. Press ENTER to conrm, and then press and hold the MENU button
for at least 3 seconds.
SOUN - In this mode you can run in sound active mode.
1. Press the MENU button until “SOUN” is displayed, press ENTER.
2. Either “ON” or “OFF” will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to conrm.
SENS - Sound sensitivity control.
1. Press the MENU button until “SENS” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER to conrm.
BLND - This will control blackout
1. Press the MENU button until “BLND” is displayed, press ENTER.
2. Either “YES” or “NO” will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for at least
three seconds to conrm.
LED - With this function the LED display will turn off after
2 minutes.
1. Press the MENU button until “LED” is displayed, press ENTER.
2. Either “ON” or “OFF” will now be displayed. Press the UP or DOWN
buttons to select “ON” to keep the LED display on at all times, or
“OFF” to allow the LED display to turn o after 2 minutes. Press any
button to turn on the LED display again.
Royal Sky System Menu
Royal Sky System Menu
Bekijk gratis de handleiding van American Audio Royal Sky, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | Royal Sky |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2544 MB |
