American Audio ACCU UFO PRO handleiding

Niet gecategoriseerd

American Audio

22 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 16American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 15

Accu UFO PRO System Menu

DEGR MENU -

360/540 - Switch the degree of the Pan between 360 and 540.

MIC MENU -

M-01-M-70 - With this function you can make the internal mic more or

less sensitive to sound.

DISPLAY MENU -

VALU (DMX-512 Value) - Display the DMX-512 value of each channel.

D ON - Display will turn off in 2 minutes.

FLIP - “Flips” the digital display 180º.

LOCK - When activated the buttons will lock automatically. See page

23 for more information.

SPEC MENU -

RDMX - Lets you adjust the DMX address via external controller.

SPEE - Lets you select the movement mode.

DFSE (Default Settings) - Resets the unit to the default settings.

FEED - Pan/Tilt feedback (error correction) on/off.

HIBE - This feature will automatically shut down the lamp and

stepping motors. Please see pages 26.

VER (Version) - Displays the software version

ADJU - Calibration functions

EDIT MENU -

STEP (S-01 - S-48) - These are the steps slots that you write your

programs into. There are at total of 48 steps. See edit procedure on

page 31.

SCXX (SC01 - SC30) - These are the scenes that are stored in

your program. There are a total of 30 scenes.

REC - This will auto save your custom program.

RUN - This will run your custom program.

Accu UFO PRO System Menu

ADDRESS MENU -

A.OO1 - A.511 (Value) - This is where you set the DMX address of the

unit.

TEST MENU -

T-01 - T-XX (Test) - Tests the functions of each channel. Note: Some

channels cannot be tested.

PLAY MENU -

RUN - Runs the unit as a “master” or in a stand alone mode. The unit

will run a internal program mode.

AUDI (Audio) - Runs the unit as a “master” or in a stand alone, sound

active mode.

AUTO - This is a precaution mode in case the DMX signal is lost. There

are four settings to choose from:

• “Hold” - This is the default setting, which in case the signal is

lost the xute will “hold” at the last setting.

• “Close” - The xture will return to its “home” standing.

• “Auto” - The xture will go into Auto mode and run a pre-pro-

grammed show.

• “Audi” - The xture will go into Sound Active mode.

RESE (RESET) MENU -

ALL - Resets all the motors in the unit.

SCAN - Resets the motors that control pan/tilt.

TIME MENU -

LIFE - Displays the xtures total running time.

CLMT - Clears the xture running time.

RPAN (REVERSE PAN) MENU -

ON/OFF - When “On” is chosen it will reverse the pan.

RTILT (REVERSE TILT) MENU -

ON/OFF - When “On” is chosen it will reverse the tilt.

FINE MENU -

ON/OFF - Switch between 8bit and 16bit movement.

Bekijk gratis de handleiding van American Audio ACCU UFO PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.