American Audio ACCU UFO PRO handleiding

Niet gecategoriseerd

American Audio

22 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 26American DJ® - www.americandj.com - Accu UFO PRO Instruction Manual Page 25

FEED - With this function you can switch the Pan/Tilt error

correction on and off. This will automatically correct the

Pan/Tilt if it is somehow moved out of place.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “FEED” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “ON” to acti-

vate this function, or “OFF” to deactivate this function.

5. Press ENTER to conrm.

6. Press MODE/ESC to return to the main menu.

HIBE - With this function you can make the unit auto-

matically shut down the lamp and stepping motors. The

default setting for this is 15 mins. After 15 mins if the unit

is not receiving a DMX signal, the unit will automatically

shut down the lamp and motors. This feature lengthens

the life of the lamp and motors. The shut down time can be

adjusted between OFF (no shut down) or 1 - 99 minutes.

Once the lamp and motors are shut down, it will reset itself

when it receives a DMX signal. When the function is set to

OFF, the lamp and motors will not shut down until power is

cut.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “HIBE” is displayed, press ENTER.

3. Press the UP or DOWN buttons to adjust the shut down time.

4. Press ENTER to conrm your selection.

5. Press MODE/ESC to return to the main menu.

Accu UFO PRO System Menu

“7”, Channel 2 value to “8”, and Channel 3 to “164”. (256 + 164

= 420)

SPEE - With this function you can select the movement

mode

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “SPEE” is displayed, press ENTER.

4. Press the UP or DOWN buttons to select either “SP-1” or

“SP-2”.

5. Press ENTER to select your desired mode.

DFSE - With this function you can restore the factory

settings of the device. All settings will be set back to the

default values. Any edited scenes will be lost. When restor-

ing the factory settings the unit must be set to the address

that the unit was in when you started editing.

1. Access the main menu.

2. Tap the UP button until “SPEC” is displayed, press ENTER.

3. Tap the UP button until “DFSE” is displayed, press ENTER.

4. The display will show “ON/OFF”.

5. Press the UP button to display “ON” to activate this function,

or “OFF” to deactivate this function.

6. Press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

When you exit this function, the unit will begin to reload

data.

Accu UFO PRO System Menu

Bekijk gratis de handleiding van American Audio ACCU UFO PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.