American Audio Accu Spot Pro handleiding

Niet gecategoriseerd

American Audio

26 pagina's

PDF beschikbaar

Handleiding

4. Press MODE/ESC to exit.

PLAY MAIN MENU -

RUN Run the unit in an Auto mode as a “master” in a

Master/Slave conguration, or as a stand alone unit -

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “RUN” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice by pressing ENTER, “PASS” will ash

in the display and xture will begin its function.

AUDI Run the unit in Sound Active mode as a “master”, or

as a stand alone unit -

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “AUDI” is displayed, press ENTER.

4. Tap the UP or DOWN button to choose between “MSTR” or

“ALON“, select your choice and press ENTER.

AUTO This is a precaution mode in case you lose the DMX

signal. The xtue has 4 modes to choose from, please see

page 14 for a description of the 4 modes -

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “PLAY” is displayed, press ENTER.

3. Tap the UP button until “AUTO” is displayed, press ENTER.

4. Now you can choose between “CLOSE”, “HOLD” “AUTO”, or

“AUDI”. “HOLD” is the default setting.

American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 18American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 17

Accu Spot Pro System Menu

On-Board System Menu.

The Accu Spot Pro comes with an easy

to navigate system menu. This next section will detail the functions of

each command in the system menu.

To access the main menu press the MODE/ESC button (7) on the front

of the unit. Tap the UP (5) or DOWN (6) butons until you reach function

you wish to change. When you reach the function you wish to change

tap the ENTER button. Again, tap the UP or DOWN buttons to change

the function. Once your changes are made, tap the ENTER button to

lock the change in the system, if the ENTER button is not selected

within eight seconds the system will automatically return to menu sec-

tion. To exit without making any changes tap the MODE/ESC button

(4).

Accu Spot Pro System Menu

ADDR MAIN MENU -

ADDR DMX Address Setting via control board -

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “ADDR” is displayed, press ENTER.

4. Now the display will show “A001”. Adjust the DMX address

by pressing the UP or DOWN buttons.

5. Press ENTER to conrm.

6. Press the MODE/ESC button to return to the main menu.

When the display is on “A001”, you can directly press the UP

or DN buttons to change the DMX start address.

TEST MAIN MENU -

TEST - This will test the functions of each channel.

1. Access the main menu by pressing MODE/ESC button.

2. Tap the UP button until “TEST” is displayed, press ENTER.

3. The display will show “T-01”. You can now press the up

button and test the different channels.

Bekijk gratis de handleiding van American Audio Accu Spot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.