American Audio Accu Spot Pro handleiding

Niet gecategoriseerd

American Audio

26 pagina's

PDF beschikbaar

Handleiding

Accu Spot Pro System Menu

American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 14American DJ® - www.americandj.com - Accu Spot Pro Instruction Manual Page 13

Accu Spot Pro System Menu

ADDRESS MENU -

AOO1 - A511 (Value) - This is where you set the DMX address of

the unit.

TEST MENU -

T-01 - T-XX (Test) - Tests the functions of each channel. There

are fourteen channels. Note: Some channels cannot be

tested.

PLAY MENU -

RUN - Runs the unit as a “master” in a Master/Slave congura-

tion or as a Stand Alone unit. The unit will run a internal pro-

gram.

AUDI (Audio) - Runs the unit as a “master” in a Master/Slave

conguration or as a Stand Alone unit in sound active mode.

AUTO - This is a precaution mode in case the DMX signal is lost.

There are four settings to choose from:

• “Hold” - This is the default setting, which in case the signal is

lost the xture will “hold” at the last setting.

• “Close” - The xture will return to its “home” standing.

• “Auto” - The xture will go into Auto mode and run a pre-pro-

grammed show.

• “Audi” - The xture will go into Sound Active mode.

LAMP MENU -

ON/OFF - Manually switch the lamp “on” and “off”.

RESE (RESET) MENU -

ALL - Resets all the motors in the unit.

SCAN - Resets the motors that control pan/tilt.

COLR (Color) - Resets the color motors.

ADDR

AXXX A001

Indicate the staring DMX address

A001 also is the setting for slave

TEST

T-01~T-XX

Automatically test the function

RUN

MSTR/ALON

Runs fixture as “master” or “alone” for auto

AUDI

MSTR/ALON

Runs fixture as “master” or “alone” for

audio

PLAY

AUTO

Clos/Hold/Auto/Audi

Runs fixture for no DMX

LAMP

ON/OFF

Manually switches lamp “on” and “off”

ALL

Reset all motors and returns fixture to home

SCAN

Reset only motors for pan/tilt

COLR

Reset only motors for colors

GOBO

Reset only motors for gobo and rotation

SHTR

Reset only motors for shutter and/or dimmer

RESE

OTHR

Reset other motors

LIFE

0000~9999

Displays the total fixture running time

LAMP

0000~9999

Displays a lamps running time

TIME

CLMP

Clear lamp running time

RPAN

ON/OFF

Reverses the pan movements

RTLT

ON/OFF

Reverses the tilt movements

FINE

ON/OFF

Switch between 16 bit/8 bit

DEGR

630/540

Pan degree select

MIC

M-XX

Mic sensitivity

VALU

D–XX D-00 (DXXX)

Display the DMX512 value of each channel

D ON

ON/OFF

Display turn off after 2mins

DISP

FLIP

ON/OFF

This function will reverse the display 180

LAAU

ON/OFF

Automatic lamp start with power

RDMX

ON/OFF

Change DMX address via external controller

DLOF

ON/OFF

Switch lamp via DMX

DLAY

D–XX D-05

Lamp on delay time

SPOT

ON/OFF

Lamp optimization

DFSE

ON/OFF

Resets all the fixture functions to default

FEED

ON/OFF

Pan/tilt feedback (error correction) on/off

SPEE

SP-1/SP-2

Movement Mode Select

DIMM

Slow/Fast

Dimmer speed

FANS

HIGH/AUTO

Fan’s mode select

VER

V1.0~V9.9

Software version

CODE

CXXX

Fixture code *code is “C050”

SPEC

ADJU

CH01~CH30

XXXX(-128~127)

Motor Calibration

STEP

S–01 ~S–48

Set the amount of your program

C–01~C–30

0 1 XX(00~FFH)

3 0 XX(00~FFH)

Edit the channels of each scene

TIME

T XXX(001~999)

Time for each scene

SCXX

CEDT

ON/OFF

Edit program via controller

REC.

RE.XX

Auto Save

EDIT

RUN

ON/OFF

Program test

Bekijk gratis de handleiding van American Audio Accu Spot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.