American Audio Accu Spot 250 handleiding
Handleiding
Je bekijkt pagina 12 van 20

American DJ® - www.americandj.com - Accu Spot 250™ Instruction Manual Page 24American DJ® - www.americandj.com - Accu Spot 250™ Instruction Manual Page 23
LADJ - With this function you can adjust the lamp via
the control board. The shutter opens and the lamp can be
adjusted. In this mode, the device will not react to any con-
trol signal.
1. Access the main menu.
2. Tap the UP button until “ADJU” is displayed, press ENTER.
3. Tap the UP button until “LADJ” is displayed, press ENTER.
4. The display will show “ON/OFF”.
5. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
TINE MAIN MENU -
NAT I - With this function you can display the running time
of the unit.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “NAT I” is displayed, press ENTER.
4. The display shows “XXXX”, “X” stands for the number of
hours.
5. Press ENTER or EXIT/DN to return to the main menu.
LAT I - With this function you can display the running time
of the lamp.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
Accu Spot 250™ System Menu
3. Tap the UP button until “LAT I” is displayed, press ENTER.
4. The display shows “XXXX”, “X” stands for the number of
hours.
5. Press ENTER or EXIT/DN to return to the main menu.
CLNT - With this function you can clear the running time of
the unit.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “CLNT” is displayed, press ENTER.
4. Press ENTER, the display will show “ON/OFF”.
5. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
CLLT - With this function you can clear the running time of
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until “TIME” is displayed, press ENTER.
3. Tap the UP button until “CLLT” is displayed, press ENTER.
4. Press ENTER, the display will show “ON/OFF”.
5. Press the UP button to select “ON” to activate this function,
or “OFF” to deactivate this function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
Accu Spot 250™ System Menu
Bekijk gratis de handleiding van American Audio Accu Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | American Audio |
Model | Accu Spot 250 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2931 MB |