American Audio Accu LED MH handleiding
Handleiding
Je bekijkt pagina 12 van 20
American DJ® - www.americandj.com - Accu LED MH Instruction Manual Page 24American DJ® - www.americandj.com - Accu LED MH Instruction Manual Page 23
or “OFF” to deactivate this function.
6. Press ENTER to conrm.
7. Press MODE/ESC to return to the main menu.
When you exit this function, the unit will begin to reload
data.
FEED - With this function you can switch the Pan/Tilt error
correction on and off. This will automatically correct the
Pan/Tilt if it is somehow moved out of place.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “FEED” is displayed, press ENTER.
4. Press the UP or DOWN buttons to select either “ON” to acti-
vate this function, or “OFF” to deactivate this function.
5. Press ENTER to conrm.
6. Press MODE/ESC to return to the main menu.
VER - Use this function to display the Software version of
the unit.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “VER” is displayed, press ENTER.
4. The display will show “V-1.0”, the display may also show, “V-
2.0”, “V-9.9” etc.
5. Press MODE/ESC to exit.
ADJU - Use this function is used to make sure all motors
Accu LED MH System Menu
are aligned and to adjust any motors that are not.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “ADJU” is displayed, press ENTER.
4. Tap the UP button until “CODE” is displayed, press ENTER.
5. The display will show “CXXX”, were as “XXX” represents the
calibration password. The calibration password is “C050.” Use
the UP or DOWN buttons to enter the proper password.
6. Once the proper password is entered the display will read
“CHXX”, were as “XX” represents the xture channel number, in
the case of the Accu LED MH 1~16.
7. Select the desired channel to be calibrated by pressing the
UP or DOWN buttons and then ENTER to conrm.
8. The display will then read “XXXX”, were “XXXX” stands for
the calibrate values.
9. Adjust the desired calibration value between –128 and 127
by pressing the UP and DOWN. As you scroll up and down
through the calibration values you will
notice slight changes in the wheel or motor you are attempting
to calibrate.
10. Once you reach your desired calibration press ENTER to
conrm and lock in your calibration.
11. Once you are completely nished press MODE/ESC to
return to the main menu.
Accu LED MH System Menu
Bekijk gratis de handleiding van American Audio Accu LED MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | American Audio |
| Model | Accu LED MH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3074 MB |
