American Audio Accu Fog 1000 handleiding

Niet gecategoriseerd

American Audio

20 pagina's

PDF beschikbaar

Handleiding

American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 27 American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 28

Accu Fog 1000 editing Program

Editing procedure 3: Record the selected scenes automati-

cally from external controller:

1. Access the main menu.

2. Select “EDIT” by pressing the UP or DOWN buttons, press

ENTER.

3. Press the UP button until the display shows “STEP”, press

ENTER.

4. Now adjust and set the number of steps by pressing the

UP or DOWN buttons. Press ENTER to conrm the number of

steps, and “PASS” will display briey.

5. Now press the DOWN button until “REC” is displayed, and

press ENTER.

6. The display will now show “RE.XX”, “XX” stands for the scene

number in the internal memory which the scenes from the con-

troller will be stored to. Press ENTER when you have chosen

the scene number.

7. Call up the scenes on the controller, and the xture will

record the scenes from the controller automatically. After the

number of scenes as selected in the “STEP” menu are loaded

into the xture, it will stop the procedure and return to the pre-

vious menu.

8. Press MODE/ESC to exit the “EDIT” menu and return to the

main menu.

Accu Fog 1000 editing Program

13. Repeat steps 3-12 to edit other scenes, you can edit and

save 48 scenes maximum.

14. Press MODE/ESC to exit, now you have edited and saved

scenes using the control board. The number of steps can be

dened under “Step” and the scenes can be called up under

“Run”. To run the scenes see page 17.

Editing procedure 2: Using an external controller (Manually

record scenes one by one):

1. Access the main menu.

2. Select “EDIT” by pressing the UP or DOWN buttons, press

ENTER.

3. The display shows “SC01”.

4. Press ENTER, and the display shows “C-01”.

5. Select “CEDT” by pressing the DOWN button, and press

ENTER.

6. The display “OFF”, press the UP button so that “ON” is dis-

played, and press ENTER.

7. The display will show “SCO2”. You have now successfully

downloaded the rst scene.

8. Adjust the Step-time needed by pressing the UP button.

9. Call up the second scene in your controller now.

10. Repeat steps 7-9 until all desired scenes are downloaded.

11. Press MODE/ESC to exit. The number of steps can be

dened under “Step” and the scenes can be called up under

“Run”.

Bekijk gratis de handleiding van American Audio Accu Fog 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.