Ambrogio L60 Elite S+ handleiding
Handleiding
Je bekijkt pagina 28 van 32
28
User’s manual
EN
ERROR SIGNALS
C. ALERT: Refer to the “TROUBLESHOOTING”
chapter for a detailed explanation on how
to x the problem.
START
pause
ON
OFF
FUNCTION
1
FUNCTION
2
FUNCTION
PAUSE
BATTERYALERT
(A)(C)
(B)(D)
No error found.
1
(1 Flash) Right-wheel motor in error.
2
(2 Flashes) Left-wheel motor in error.
3
(3 Flashes) Blade motor in error.
4
(4 Flashes) Tipping over.
5
(5 Flashes) Drop-off sensor has been
active for too long.
(Flashing) Stop due to pressing of the
STOP button.
PART REPLACEMENT
RECOMMENDATIONS FOR REPLACING PARTS
Important
Carry out the replacement operations and repairs according to the Manufacturer’s instructions, or contact the
Service Centre if these operations are not included in the manual.
BATTERY REPLACEMENT
Important
Replace the batteries at an authorised service centre.
BLADE REPLACEMENT
1. Stop the robot safely (see “Robot safety stop”).
Important
Use protective gloves to avoid the risk of cutting your hands.
For replacement, use only the original blade suitable for the device.
MODEL: A060EL0
Cutting blade code: 50_D0018_02
2. Turn over the robot and position it so as not to ruin the covering
hood.
3. Unscrew the screws (B) to remove the blade (A).
4. Insert a new blade and fasten the screws.
5. Turn the robot over to its operating position.
Important
check that the slope of the blade, with the robot in the
start position, is facing downwards.
INSERTING BLADE WITH SCREWS
(B)
(A)
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
Bekijk gratis de handleiding van Ambrogio L60 Elite S+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ambrogio |
| Model | L60 Elite S+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5177 MB |
