Ambrogio L60 Elite S+ handleiding
Handleiding
Je bekijkt pagina 26 van 32
26
User’s manual
EN
TROUBLESHOOTING GUIDE
TROUBLESHOOTING
The information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation.
Some failures can be resolved by the user; others require specic technical skills or special abilities and therefore must only be
resolved by qualied personnel with certied experience gained in the specic eld of intervention.
When the robot is in error with the ALERT light on or ashing, refer to this chapter for possible remedies or access the APP via
your smartphone for anything not contained in this manual.
Warning – Caution
Safely stop the robot (see “Robot Safety Stop”) in case it is necessary to check the robot, in order to avoid danger
of accidental blade starting.
Problem Cause Remedies
Abnormal vibrations
The robot is very noisy
Cutting blade damaged.
Replace the blade with a new one (see “Blade
Replacement”).
Cutting blade fouled (tapes, ropes,
plastic fragments, etc.).
Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of injury.
Remove the debris from the blade.
The robot was started too close to
obstacles (less than 1 m. (40 ") away)
or in the presence of unexpected
obstacles (fallen branches, forgotten
objects, etc.).
Stop the robot safely (see “Robot safety stop”).
Remove the obstacles and restart the robot.
Electric motor failure.
Have the motor repaired or replaced by the
nearest authorised service centre.
Too high grass.
Increase the cutting height (see “Cutting height
adjustment”).
Carry out a preliminary cutting of the area with a
normal lawnmower.
The work area is not
completely mowed.
Not enough work hours. Start the robot every day.
Cutting blade fouled with deposits and/
or residuals.
Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of injury.
Clean the cutting blade.
Cutting blade worn.
Replace the blade with original spare parts (see
“Blade Replacement”).
Work area is too big compared to the
actual capacity of the robot.
Adjust the work area (see “Technical
Specications”).
The batteries are about to end their life
cycle.
Replace the batteries with original spare parts.
The batteries do not recharge
completely.
Recharge the batteries for at least 4 hours.
Bekijk gratis de handleiding van Ambrogio L60 Elite S+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ambrogio |
| Model | L60 Elite S+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5177 MB |
